We cut sheet metal parts and billets from specifications and drawings provided by the customer on our sheet laser cutting benches.
Materials we cut: mild steel, galvanized or hot-dip galvanized steel, stainless steel, aluminum, brass and copper.
Allowable material thicknesses: 0.5 up to 25 mm.
Laser cutting allows the cutting of parts very quickly and accurately. The accuracy tolerance for positioning is +/- 0.05 mm. Our fiber laser has outstanding cutting speed and is equipped with an automatic material loading and unloading system. This gives it productivity levels comparable to sheet metal punching/nibbling. When cutting with a laser, the thermal effect to the material is small and it is therefore possible to cut small holes (minimum diameter =~1/2 material thickness), as well as holes that can be threaded after cutting with no additional machining required. The width of the cut line is minimal – it is smaller than 0.5 mm for most materials.
Laser cutting benches available for sheet cutting:
|Trumpf 3050 Fiber||ByStar Fiber 3015
|Trumpf TruLaser 8000||Trumpf TruLaser 5060 TLF5000 laser|
|Laser power||8000 W||6000 W||6000 W||5000 W|
|Table measurements||1500 x 3000 mm||1500 x 3000 mm||2500 x 8000 mm||2000 x 6000 mm|
|Curb rate (in between movements)||Up to 300 m/min||Up to 300 m/min||Up to 300 m/min||Up to 300 m/min|
|Cutting speed||Up to 65 m/min||Up to 58 m/min||Up to 40 m/min||Up to 40 m/min|